Please wait while the page loads...

2013 Ford Focus Check Engine Light Flashing

Although there are many probable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are definitive ongoing causes including something as clear as a loose gas cap. Alternative ongoing reasons for a Check Engine Light are a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, dirty mass airflow sensor, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was revamped.

Every 2013 Ford Focus was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its decisive systems. The sensors are continually detecting conditions while sending data to the electrical control team. If the electrical control team detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is amiss nor what to do about it. That’s where we come in; Coggin Deland Ford provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service licensed.

2013 Ford Focus Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear noble away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Focus. There are hundreds of various codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling main diagnostics will give you conducive knowledge about your automobile and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, precise and practical automobile symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of practical OBD codes, there are also hundreds of practical reasons for the light, including:

  • Transmission issues
  • Ignition system faults
  • Bad Spark Plugs
  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues
  • Computer output circuit issues
  • Fuel and air metering systems problems
  • Old Battery
  • O2 Sensor

This is why it is decisive for someone who does not have a few of automotive knowledge to not assume what a code means. If the engine light comes on due to a unsafe concern, you risk detrimental your automobile further by not repairing the issue honorable away. Call Coggin Deland Ford at 3862100247 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out quickly by a certified Ford mechanic.

How many miles can you drive with the check engine light?

If you check engine light is blinking, we advise that you pull over and contact Coggin Deland Ford to assist mean if your vehicle is reliable to drive in or if we advise a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly.

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2013 Ford Focus is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few discrete ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Ford Focus. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can advise a assortment of substitute things. It can be as uncomplicated as your gas cap being loose or as unsafe as engine knocking. If your check engine light is on in your 2013 Ford Focus, contact Coggin Deland Ford. Our Ford service department can help you find out what code is turning your check engine light on or inspect why your check engine light is flashing. Contact Coggin Deland Ford today!

What could cause the check engine light to come on in a 2013 Ford Focus?

When your check engine light comes on, this could be as commonplace as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a serious problem that could cause serious damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow customarily means something less serious but a flashing check engine light indicates that your vehicle’s engine is in serious trouble and service is necessary immediately. If your check engine light is flashing in your 2013 Ford Focus, we exceedingly mean not to drive the vehicle and schedule Ford service now. Below is a list of the most commonplace reasons your check engine light can come on:

  • Your 2013 Ford Focus has a vacuum leak. Every Ford Focus has a vacuum system that performs a expanded mixture of functions. The vacuum system also helps lower bad emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to important heat or extreme annoyed.
  • Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2013 Ford Focus’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Deland Ford offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Ford Focus will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your automobile may run at a higher temperature, too, which can cause alternative problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or alternative item can wreak havoc on your 2013 Ford Focus if it’s not installed properly. These aftermarket parts and accessories can jettison the battery, trigger the check engine light, or even avert the vehicle from starting. If these issues sound friendly, deliver your Focus to Ford and have our unit of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • The battery is low or dead. The battery in your 2013 Ford Focus is every critical. Without a automobile battery, your automobile won’t start, light up the road ahead, play the radio or charge your phone. Today’s automobile batteries last much longer than they did a few decades ago, and they don't surely require maintenance. The estimate of a new one depends on the type of Ford you drive, but check our accepted service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, noted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less functional when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Ford Focus's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to pick the honest mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a automobile to fail an emissions test.
  • One of the most pure and frequent cause is that your 2013 Ford Focus gas cap is loose, damaged or missing. The gas cap for your 2013 Ford Focus serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is former or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on today after you put gas in your 2013 Ford Focus, first thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • New Spark Plugs or Plug Wires are needed for your 2013 Ford Focus. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or former, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, considerable to more expensive repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford Focus is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to possible changes, like altitude. If your Ford Focus is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.

Will the check engine light reset itself?

The check engine light on your 2013 Ford Focus will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going essential, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Ford Focus light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Deland Ford so the light and code can be double-checked and reset.

Check Engine Light Service 2013 Ford Focus

What do you do when you’re driving along in your Ford Focus and immediately, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the value of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Ford Focus checked as soon as alive. Ignoring that warning could end up causing gigantic damage to expensive engine components.

When your 2013 Ford Focus's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electrical control system that it can’t careful, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic inspect tool that is used by our Ford auto repair mechanics at Coggin Deland Ford. There are also a number of rather cheap code readers that are designed for do-it-yourselfers, should you option that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to indicate the issue and repair it.

Is it safe to drive your 2013 Ford Focus with the check engine light on?

If the check engine light is glaring, this means that there is a dangerous issue and it is recommended to service your Ford Focus quickly. This question is not very straightforward because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is customarily indicated by a dependable glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more disturbing problem. Call the mentors at Coggin Deland Ford by dialing 3862100247 so you can describe the issues. Or reduce your speed and bring your 2013 Ford to our certified mechanics as soon as conceivable.

2013 Ford Focus Check Engine Light

If the check engine light in your 2013 Ford Focus starts flashing, that means that the problem needs immediate attention and your Ford should be brought in immediately. A flashing light illustrates that the problem is perilous and if not taken care of immediately may result in forceful damage to the vehicle. This blinking light usually hints a exacting engine misfire allowing unburned fuel to be drained into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our unit of automotive experts at Coggin Deland Ford expeditiously by calling 3862100247. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

How much does it cost to get the engine light checked?

The central cost for a check engine light diagnosis & testing is consistently between $88 and $111. The grand news, Coggin Deland Ford offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more unusual failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it grand to get the solid code reading and diagnosis.