2013 Ford Mustang Check Engine Light
If the check engine light in your 2013 Ford Mustang starts flashing, that means that the problem needs urgent attention and your Ford should be brought in suddenly. A flashing light indicates that the problem is perilous and if not taken care of suddenly may result in major damage to the automobile. This blinking light usually indicates a scrupulous engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can swiftly advance the temperature of the catalytic converter to a point where damage is feasible, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can truly be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very fancy repair. If your check engine light is blinking, please contact our team of automotive experts at Coggin Deland Ford hastily by calling 3862100247.
Check Engine Light Service 2013 Ford Mustang
What do you do when you’re driving along in your Ford Mustang and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t represent you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Ford Mustang checked as soon as probable. Ignoring that warning could end up causing large damage to expensive engine components.
When your 2013 Ford Mustang's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”
When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Ford auto repair mechanics at Coggin Deland Ford. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced high-tech to find out the issue and repair it.
How much does it cost to get the engine light checked?
The average cost for a check engine light diagnosis & testing is generally between $88 and $111. The handy news, Coggin Deland Ford offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not appropriately tightened to a more scrupulous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it handy to get the ready for use code reading and diagnosis.
How many miles can you drive with the check engine light?
Since each check engine code has its own level of severity, it is complex to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we advise that you pull over and contact Coggin Deland Ford to assist read if your vehicle is safe to drive in or if we advise a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy subsequently.
Is it safe to drive your 2013 Ford Mustang with the check engine light on?
This question is not very authentic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is customarily indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more curious problem. If the check engine light is flashing, this means that there is a curious issue and it is recommended to service your Ford Mustang shortly. Call the experts at Coggin Deland Ford by dialing 3862100247 so you can describe the issues. Or lower your speed and bring your 2013 Ford to our certified mechanics as soon as practical.
2013 Ford Mustang Check Engine Light Codes
The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your Mustang. There are hundreds of various codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling basic diagnostics will give you cooperative knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, obvious and curious vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of suitable OBD codes, there are also hundreds of suitable reasons for the light, including:
- Loose Gas Cap or Missing Gas Cap
- Computer output circuit issues
- O2 Sensor
- Fuel and air metering systems problems
- Emissions controls issues
- Transmission issues
- Bad Spark Plugs
- Ignition system faults
- Old Battery
This is why it is impressive for someone who does not have various of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out rapidly by a certified Ford mechanic. If the engine light comes on due to a critical concern, you risk harmful your car added by not repairing the issue right away. Call Coggin Deland Ford at 3862100247 today or schedule your check engine light service online today!
2013 Ford Mustang Check Engine Light Flashing
Although there are countless ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are innumerable ample causes incorporating something as realistic as a loose gas cap. Extra ample reasons for a Check Engine Light are faulty emissions control part, a malfunction with the fuel injection system, damaged oxygen sensor, dirty mass airflow sensor, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as fundamental to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.
Every 2013 Ford Mustang was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The sensors are customarily detecting conditions while sending data to the electrical control unit. If the electrical control unit detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is mistaken nor what to do about it. That’s where we come in; Coggin Deland Ford provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Largely Qualified Service professional.
What could cause the check engine light to come on in a 2013 Ford Mustang?
When your check engine light comes on, this could be as real as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a adequate problem that could cause adequate damage to your engine and come with a colossal repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow normally means something less adequate but a flashing check engine light indicates that your vehicle’s engine is in adequate trouble and service is decisive shortly. If your check engine light is flashing in your 2013 Ford Mustang, we excessively suggest not to drive the vehicle and schedule Ford service now. Below is a list of the most real reasons your check engine light can come on:
- New Spark Plugs or Plug Wires are needed for your 2013 Ford Mustang. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires transport the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or old, you will experience meager performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, first-rate to more expensive repairs.
- Issues with all aftermarket items. An aftermarket alarm, exhaust or further item can wreak havoc on your 2013 Ford Mustang if it’s not installed perfectly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even hinder the vehicle from starting. If these issues sound ongoing, bring your Mustang to Ford and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing all issue. Getting accessories, highly aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get meager work and damage caused by meager installation work corrected.
- One of the most ongoing and frequent cause is that your 2013 Ford Mustang gas cap is loose, damaged or missing. The gas cap for your 2013 Ford Mustang serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2013 Ford Mustang, first thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
- Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less compelling when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Ford Mustang's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to learn the right mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a automobile to fail an emissions test.
- The battery is low or dead. The battery in your 2013 Ford Mustang is every fantastic. Without a automobile battery, your automobile won’t start, light up the road ahead, play the radio or charge your phone. Today’s automobile batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Ford you drive, but check our ongoing service coupons and specials.
- Your 2013 Ford Mustang has a vacuum leak. Every Ford Mustang has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, highly if they’re exposed to imposing heat or extreme freezing.
- Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford Mustang is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to accurate changes, like altitude. If your Ford Mustang is having trouble starting, idling rough or has a agile change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
- Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2013 Ford Mustang’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Deland Ford offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Ford Mustang will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your automobile may run at a higher temperature, too, which can cause further problems from overheating.
What Does the Check Engine Light Mean?
One of the most customarily misunderstood lights or indicators in your 2013 Ford Mustang is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few odd ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Ford Mustang. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a range of divergent things. It can be as easy as your gas cap being loose or as remarkable as engine knocking. If your check engine light is on in your 2013 Ford Mustang, contact Coggin Deland Ford. Contact Coggin Deland Ford today! Our Ford service department can help you find out what code is turning your check engine light on or audit why your check engine light is glaring.
Will the check engine light reset itself?
The check engine light on your 2013 Ford Mustang will ordinarily shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going handy, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Ford Mustang light will go off after about 20-40 miles. If you travel to work over that amount and the light is still on, you will need to bring it in to Coggin Deland Ford so the light and code can be double-checked and reset.