Please wait while the page loads...

How much does it cost to get the engine light checked?

The middle cost for a check engine light diagnosis & testing is constantly between $88 and $111. The lucrative news, Coggin Deland Ford offers complimentary multi-point inspections and free diagnostics, in most cases, to assist select the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more awesome failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it lucrative to get the polite code reading and diagnosis.

2014 Ford Explorer Check Engine Light

A flashing light indicates that the problem is perilous and if not taken care of straightaway may result in major wear and tear to the vehicle. If the check engine light in your 2014 Ford Explorer starts flashing, that means that the problem needs precipitous attention and your Ford should be brought in straightaway. This blinking light usually indicates a strict engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can promptly expand the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can strictly be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If your check engine light is blinking, please contact our unit of automotive experts at Coggin Deland Ford rapidly by calling 3862100247. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Will the check engine light reset itself?

The check engine light on your 2014 Ford Explorer will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Ford Explorer light will go off after about 20-40 miles. If you travel to work over that fee and the light is still on, you will need to transport it in to Coggin Deland Ford so the light and code can be double-checked and reset.

2014 Ford Explorer Check Engine Light Flashing

Although there are innumerable achievable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are frequent authentic causes including something as authentic as a loose gas cap. Distinct authentic reasons for a Check Engine Light are dirty mass airflow sensor, faulty emissions control part, a malfunction with the fuel injection system, damaged oxygen sensor, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.

Every 2014 Ford Explorer was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its troublesome systems. The sensors are commonly detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light flashes telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what precisely is inaccurate nor what to do about it. That’s where we come in; Coggin Deland Ford provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service expert.

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2014 Ford Explorer is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a range of things for your 2014 Ford Explorer. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name various. With that being said, the check engine light can mean a vary of contrasting things. It can be as delightful as your gas cap being loose or as serious as engine knocking. If your check engine light is on in your 2014 Ford Explorer, contact Coggin Deland Ford. Our Ford service department can help you find out what code is turning your check engine light on or investigate why your check engine light is flashing. Contact Coggin Deland Ford today!

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Coggin Deland Ford to help indicate if your car is safe to commute in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is not easy to predict how countless miles you can commute with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy subsequently.

What could cause the check engine light to come on in a 2014 Ford Explorer?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a risky problem that could cause risky damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow mostly means something less risky but a flashing check engine light suggests that your vehicle’s engine is in risky trouble and service is basic abruptly. If your check engine light is flashing in your 2014 Ford Explorer, we extraordinarily advise not to drive the vehicle and schedule Ford service today. Below is a list of the most normal reasons your check engine light can come on:

  • One of the most affable and frequent cause is that your 2014 Ford Explorer gas cap is loose, damaged or missing. The gas cap for your 2014 Ford Explorer serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is historic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on shortly after you put gas in your 2014 Ford Explorer, initial thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your 2014 Ford Explorer’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Coggin Deland Ford offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it revamped, your 2014 Ford Explorer will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • New Spark Plugs or Plug Wires are decisive for your 2014 Ford Explorer. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or historic, you will experience small performance and reduced power. In a bit extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, best to more expensive repairs.
  • Your 2014 Ford Explorer has a vacuum leak. Every Ford Explorer has a vacuum system that performs a giant variety of functions. The vacuum system also helps cut destructive emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to exciting heat or extreme agile.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford Explorer is what determines how much fuel is decisive to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to aware changes, like altitude. If your Ford Explorer is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.
  • The battery is small or dead. The battery in your 2014 Ford Explorer is every exciting. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did some decades ago, and they don't really require maintenance. The estimate of a new one depends on the type of Ford you drive, but check our current service coupons and specials.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2014 Ford Explorer if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even hinder the vehicle from starting. If these issues sound aware, bring your Explorer to Ford and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts initial place might cost a little bit more but could save you money from having to get small work and wear and tear caused by small installation work corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less exact when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your 2014 Ford Explorer's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the polite mixture of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a car to fail an emissions test.

Is it safe to drive your 2014 Ford Explorer with the check engine light on?

This question is not very discernible because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is consistently indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more harsh problem. If the check engine light is flashing, this means that there is a harsh issue and it is recommended to service your Ford Explorer suddenly. Call the experts at Coggin Deland Ford by dialing 3862100247 so you can describe the issues. Or reduce your speed and bring your 2014 Ford to our certified mechanics as soon as probable.

2014 Ford Explorer Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear polite away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Explorer. There are hundreds of discrete codes that your check engine light can designate. While that sounds daunting, with a scant patience, tackling large diagnostics will give you exceptional knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, distinguishable and accessible vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of capability OBD codes, there are also hundreds of capability reasons for the light, including:

  • Transmission issues
  • Ignition system faults
  • Fuel and air metering systems problems
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Old Battery
  • Bad Spark Plugs
  • O2 Sensor
  • Emissions controls issues

This is why it is common for someone who does not have helpful of automotive knowledge to not assume what a code means. If the engine light comes on due to a curious concern, you risk damaging your car extra by not repairing the issue proper away. When your check engine light comes on, you should get it checked out suddenly by a certified Ford technician. Call Coggin Deland Ford at 3862100247 today or schedule your check engine light service online today!

Check Engine Light Service 2014 Ford Explorer

What do you do when you’re driving along in your Ford Explorer and suddenly, a yellow light brightens on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Ford Explorer checked as soon as alive. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2014 Ford Explorer's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is naturally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic diagnose tool that is used by our Ford auto repair mechanics at Coggin Deland Ford. There are also a number of relatively economical code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced high-tech to determine the issue and repair it.