How much does it cost to get the engine light checked?
The check engine light warns of issues ranging from a gas cap that's not accordingly tightened to a more momentous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it successful to get the practical code reading and diagnosis. The average cost for a check engine light diagnosis & testing is constantly between $88 and $111. The successful news, Coggin Deland Ford offers complimentary multi-point inspections and free diagnostics, in most cases, to help find out the cause of your check engine light.
Is it safe to drive your 2017 Ford Explorer with the check engine light on?
If the check engine light is flashing, this means that there is a unsafe issue and it is recommended to service your Ford Explorer abruptly. This question is not very authentic because it any depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be protected to drive. This is typically indicated by a essential glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more competent problem. Call the experts at Coggin Deland Ford by dialing 3862100247 so you can describe the issues. Or reduce your speed and bring your 2017 Ford to our certified mechanics as soon as likely.
How many miles can you drive with the check engine light?
It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we recommend that you pull over and contact Coggin Deland Ford to help designate if your vehicle is safe to drive in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is scrupulous to predict how numerous miles you can drive with the warning light on.
Will the check engine light reset itself?
The check engine light on your 2017 Ford Explorer will usually shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2017 Ford Explorer light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to deliver it in to Coggin Deland Ford so the light and code can be double-checked and reset.
2017 Ford Explorer Check Engine Light
A shining light indicates that the problem is extraordinary and if not taken care of urgently may result in dominant damage to the vehicle. If the check engine light in your 2017 Ford Explorer starts shining, that means that the problem needs immediate attention and your Ford should be brought in urgently. This blinking light commonly indicates a strict engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly hike the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, classic or dirty spark plug can cause the engine to misfire. If your check engine light is blinking, please contact our team of automotive experts at Coggin Deland Ford rapidly by calling 3862100247. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly expensive repair.
Check Engine Light Service 2017 Ford Explorer
What do you do when you’re driving along in your Ford Explorer and immediately, a yellow light flashes on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the value of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t represent you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2017 Ford Explorer checked as soon as copious. Ignoring that warning could end up causing major damage to expensive engine components.
When your 2017 Ford Explorer's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”
When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is find out with an mechanical observe tool that is used by our Ford auto repair mechanics at Coggin Deland Ford. There are also a number of rather economical code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to favor the issue and repair it.
2017 Ford Explorer Check Engine Light Flashing
Although there are countless ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are assorted accepted causes including something as easy as a loose gas cap. Additional accepted reasons for a Check Engine Light are faulty head gasket, faulty emissions control part, a malfunction with the fuel injection system, dirty mass airflow sensor, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Mechanics and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.
Every 2017 Ford Explorer was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the automobile on its laborious systems. The sensors are frequently detecting conditions while sending data to the technological control unit. If the technological control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Coggin Deland Ford provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service skilled.
2017 Ford Explorer Check Engine Light Codes
The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard hastily illuminates, but in reality, it is not something that should cause you to shut down in fear decent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Explorer. There are hundreds of disparate codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling main diagnostics will give you favorable knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, evident and accessible vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:
- Ignition system faults
- Emissions controls issues
- Loose Gas Cap or Missing Gas Cap
- O2 Sensor
- Transmission issues
- Bad Spark Plugs
- Old Battery
- Computer output circuit issues
- Fuel and air metering systems problems
This is why it is basic for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Coggin Deland Ford at 3862100247 straightaway or schedule your check engine light service online today! If the engine light comes on due to a unhealthy concern, you risk damaging your vehicle additional by not repairing the issue honest away. When your check engine light comes on, you should get it checked out quickly by a certified Ford mechanic.
What could cause the check engine light to come on in a 2017 Ford Explorer?
When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a effective problem that could cause effective damage to your engine and come with a colossal repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow frequently means something less effective but a twinkling check engine light hints that your vehicle’s engine is in effective trouble and service is necessary hastily. If your check engine light is twinkling in your 2017 Ford Explorer, we exceptionally suggest not to drive the vehicle and schedule Ford service at this moment. Below is a list of the most routine reasons your check engine light can come on:
- One of the most admitted and bountiful cause is that your 2017 Ford Explorer gas cap is loose, damaged or missing. The gas cap for your 2017 Ford Explorer serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is aged or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't fancy. If your check engine light turns on quickly after you put gas in your 2017 Ford Explorer, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
- New Spark Plugs or Plug Wires are fundamental for your 2017 Ford Explorer. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your automobile. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or aged, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more fancy repairs.
- Issues with any aftermarket items. An aftermarket alarm, exhaust or extra item can wreak havoc on your 2017 Ford Explorer if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the automobile from starting. If these issues sound admitted, transport your Explorer to Ford and have our squad of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might price a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
- Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2017 Ford Explorer’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Deland Ford offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it repaired, your 2017 Ford Explorer will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause extra problems from overheating.
- Your 2017 Ford Explorer has a vacuum leak. Every Ford Explorer has a vacuum system that performs a expansive variety of functions. The vacuum system also helps lower bad emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to unusual heat or extreme freezing.
- Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, acknowledged as the O2 sensor, measures the deposit of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your automobile will be less effective when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2017 Ford Explorer's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the judicious mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
- The battery is low or dead. The battery in your 2017 Ford Explorer is every exciting. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a little decades ago, and they don't really require maintenance. The value of a new one depends on the type of Ford you commute, but check our current service coupons and specials.
- Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Ford Explorer is what determines how much fuel is fundamental to run your engine efficiently by measuring the deposit of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Ford Explorer is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
What Does the Check Engine Light Mean?
One of the most frequently misunderstood lights or indicators in your 2017 Ford Explorer is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few divergent ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2017 Ford Explorer. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a assortment of distinctive things. It can be as easy as your gas cap being loose or as risky as engine knocking. If your check engine light is on in your 2017 Ford Explorer, contact Coggin Deland Ford. Contact Coggin Deland Ford today! Our Ford service department can aid you find out what code is turning your check engine light on or investigate why your check engine light is blinking.