Please wait while the page loads...

Check Engine Light Service 2017 Ford Fusion

What do you do when you’re driving along in your Ford Fusion and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2017 Ford Fusion checked as soon as conceivable. Ignoring that warning could end up causing extensive wear and tear to expensive engine elements.

When your 2017 Ford Fusion's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t noble, a computer turns on your check engine light. This amber or yellow light is mostly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an mechanical probe tool that is used by our Ford auto repair mechanics at Coggin Deland Ford. There are also a number of comparably economical code readers that are designed for do-it-yourselfers, should you elect for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to designate the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2017 Ford Fusion will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2017 Ford Fusion light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Deland Ford so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2017 Ford Fusion?

When your check engine light comes on, this could be as uncomplicated as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a strict problem that could cause strict damage to your engine and come with a exciting repair bill. Depending on your make and model, the check engine light will illuminate or blink. A natural glow commonly means something less strict but a blinking check engine light illustrates that your vehicle’s engine is in strict trouble and service is mandatory now. If your check engine light is blinking in your 2017 Ford Fusion, we very recommend not to drive the vehicle and schedule Ford service today. Below is a list of the most typical reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are crucial for your 2017 Ford Fusion. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or long-established, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, extensive to more expensive repairs.
  • The battery is low or dead. The battery in your 2017 Ford Fusion is every necessary. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a bit decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Ford you drive, but check our current service coupons and specials.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2017 Ford Fusion’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Coggin Deland Ford offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it serviced, your 2017 Ford Fusion will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause disparate problems from overheating.
  • One of the most acknowledged and frequent cause is that your 2017 Ford Fusion gas cap is loose, damaged or missing. The gas cap for your 2017 Ford Fusion serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is long-established or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on abruptly after you put gas in your 2017 Ford Fusion, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be interchanged. The mass airflow sensor in your Ford Fusion is what determines how much fuel is crucial to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to conclusive changes, like altitude. If your Ford Fusion is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or disparate item can wreak havoc on your 2017 Ford Fusion if it’s not installed accurately. These aftermarket elements and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound commonplace, bring your Fusion to Ford and have our squad of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, largely aftermarket parts and accessories, or using OEM elements first place might cost a slight bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be interchanged. The Oxygen sensor, noted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less helpful when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2017 Ford Fusion's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to find out the proper mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your 2017 Ford Fusion has a vacuum leak. Every Ford Fusion has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, largely if they’re exposed to imposing heat or extreme quick.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is blinking, we imply that you pull over and contact Coggin Deland Ford to help learn if your vehicle is safe to drive in or if we imply a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a detrimental sensor to plug wires needing to be replenished.

2017 Ford Fusion Check Engine Light

If the check engine light in your 2017 Ford Fusion starts flashing, that means that the problem needs immediate attention and your Ford should be brought in immediately. A flashing light hints that the problem is dangerous and if not taken care of immediately may result in big damage to the vehicle. This blinking light frequently indicates a exacting engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can suddenly expand the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can truly be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a particularly expensive repair. If your check engine light is flashing, please contact our team of automotive advisors at Coggin Deland Ford shortly by calling 3862100247.

Is it safe to drive your 2017 Ford Fusion with the check engine light on?

This question is not very logical because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is mostly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more dangerous problem. If the check engine light is shining, this means that there is a dangerous issue and it is recommended to service your Ford Fusion urgently. Call the experts at Coggin Deland Ford by dialing 3862100247 so you can describe the issues. Or reduce your speed and bring your 2017 Ford to our certified mechanics as soon as available.

2017 Ford Fusion Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several effortless causes including something as effortless as a loose gas cap. Extra effortless reasons for a Check Engine Light are damaged oxygen sensor, faulty emissions control part, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.

Every 2017 Ford Fusion was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are continually detecting conditions while sending data to the electronic control company. If the electronic control company detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is amiss nor what to do about it. That’s where we come in; Coggin Deland Ford provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Greatly Qualified Service experienced.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more distinguishable failure like a damaging catalytic converter or a problem with one of the car's oxygen sensors, so it courageous to get the lawful code reading and diagnosis. The middle cost for a check engine light diagnosis & testing is customarily between $88 and $111. The courageous news, Coggin Deland Ford offers complimentary multi-point inspections and free diagnostics, in most cases, to assist imply the cause of your check engine light.

2017 Ford Fusion Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard abruptly illuminates, but in reality, it is not something that should cause you to shut down in fear decent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Fusion. There are hundreds of various codes that your check engine light can mean. While that sounds daunting, with a little patience, tackling large diagnostics will give you essential knowledge about your vehicle and will also allow that Check Engine Light to do what it is surely supposed to do: be your guide. Unfortunately, visible and essential vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of available OBD codes, there are also hundreds of available reasons for the light, including:

  • Transmission issues
  • Bad Spark Plugs
  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Old Battery
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Computer output circuit issues

This is why it is dramatic for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Coggin Deland Ford at 3862100247 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out quickly by a certified Ford mechanic. If the engine light comes on due to a dangerous concern, you risk damaging your car extra by not repairing the issue good away.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2017 Ford Fusion is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few divergent ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light brightens in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2017 Ford Fusion. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name assorted. With that being said, the check engine light can mean a variety of conspicuous things. It can be as plain as your gas cap being loose or as serious as engine knocking. If your check engine light is on in your 2017 Ford Fusion, contact Coggin Deland Ford. Contact Coggin Deland Ford today! Our Ford service department can assist you read what code is turning your check engine light on or diagnose why your check engine light is flashing.