Please wait while the page loads...

What could cause the check engine light to come on in a 2019 Ford Ranger?

When your check engine light comes on, this could be as plain as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a hazardous problem that could cause hazardous damage to your engine and come with a substantial repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow generally means something fewer hazardous but a flashing check engine light expresses that your vehicle’s engine is in hazardous trouble and service is needed hastily. If your check engine light is flashing in your 2019 Ford Ranger, we highly recommend not to travel to work the vehicle and schedule Ford service today. Below is a list of the most daily reasons your check engine light can come on:

  • The battery is low or dead. The battery in your 2019 Ford Ranger is every essential. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't really require maintenance. The value of a new one depends on the type of Ford you drive, but check our current service coupons and specials.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford Ranger is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to conclusive changes, like altitude. If your Ford Ranger is having trouble starting, idling rough or has a precipitous change in the position of the throttle pedal, this could be a sign of a destructive mass airflow sensor.
  • Your catalytic converter is destructive or going destructive. The catalytic converter is a part of your 2019 Ford Ranger’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Deland Ford offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it repaired, your 2019 Ford Ranger will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause other problems from overheating.
  • New Spark Plugs or Plug Wires are essential for your 2019 Ford Ranger. The spark plugs are the part of your engine that ignites the air/fuel assortment in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are destructive or classic, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or break to ignition coils and O2 sensors, main to more pricey repairs.
  • One of the most current and countless cause is that your 2019 Ford Ranger gas cap is loose, damaged or missing. The gas cap for your 2019 Ford Ranger serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a destructive fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on immediately after you put gas in your 2019 Ford Ranger, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your 2019 Ford Ranger has a vacuum leak. Every Ford Ranger has a vacuum system that performs a expanded variety of functions. The vacuum system also helps cut harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to thrilling heat or extreme freezing.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less efficient when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause break to your catalytic converter and your 2019 Ford Ranger's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the right assortment of air and fuel that enters the cylinders in your engine. A destructive O2 sensor can also cause a vehicle to fail an emissions test.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2019 Ford Ranger if it’s not installed accurately. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound cordial, bring your Ranger to Ford and have our team of certified mechanics ensure that your aftermarket items were installed well and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might value a microscopic bit more but could save you money from having to get poor work and break caused by poor installation work corrected.

2019 Ford Ranger Check Engine Light

If the check engine light in your 2019 Ford Ranger starts flashing, that means that the problem needs immediate attention and your Ford should be brought in hastily. A flashing light expresses that the problem is efficient and if not taken care of hastily may result in effective damage to the vehicle. This blinking light commonly indicates a exacting engine misfire allowing unused fuel to be deposited into the exhaust system. There it can suddenly raise the temperature of the catalytic converter to a point where damage is possible, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can definitely be the cause. A bad, erstwhile or dirty spark plug can cause the engine to misfire. If your check engine light is glaring, please contact our team of automotive experts at Coggin Deland Ford urgently by calling 3862100247. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a especially expensive repair.

2019 Ford Ranger Check Engine Light Flashing

Although there are copious ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are plentiful available causes comprising something as available as a loose gas cap. Alternative available reasons for a Check Engine Light are a malfunction with the fuel injection system, damaged oxygen sensor, faulty head gasket, faulty emissions control part, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.

Every 2019 Ford Ranger was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its large systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is inaccurate nor what to do about it. That’s where we come in; Coggin Deland Ford provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service experienced.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not accordingly tightened to a more alarming failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it hopeful to get the appropriate code reading and diagnosis. The central price for a check engine light diagnosis & testing is naturally between $88 and $111. The hopeful news, Coggin Deland Ford offers complimentary multi-point inspections and free diagnostics, in most cases, to help opt for the cause of your check engine light.

2019 Ford Ranger Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard swiftly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also simple as the OBD (on-board computer diagnostic system) in your Ranger. There are hundreds of other codes that your check engine light can represent. While that sounds daunting, with a small patience, tackling central diagnostics will give you plentiful knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Regrettably, overt and cooperative vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of acceptable OBD codes, there are also hundreds of acceptable reasons for the light, including:

  • Emissions controls issues
  • Transmission issues
  • Old Battery
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Fuel and air metering systems problems
  • Ignition system faults
  • Bad Spark Plugs

This is why it is basic for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Coggin Deland Ford at 3862100247 at this moment or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out instantly by a certified Ford mechanic. If the engine light comes on due to a severe concern, you risk destructive your vehicle further by not repairing the issue right away.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is troublesome to predict how frequent miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy properly. If you check engine light is flashing, we recommend that you pull over and contact Coggin Deland Ford to help express if your vehicle is dependable to drive in or if we recommend a tow truck.

Will the check engine light reset itself?

The check engine light on your 2019 Ford Ranger will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going relevant, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2019 Ford Ranger light will go off after about 20-40 miles. If you drive over that sum and the light is still on, you will need to bring it in to Coggin Deland Ford so the light and code can be double-checked and reset.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2019 Ford Ranger is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few divergent ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light flashes in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2019 Ford Ranger. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of distinct things. It can be as obvious as your gas cap being loose or as perilous as engine knocking. If your check engine light is on in your 2019 Ford Ranger, contact Coggin Deland Ford. Contact Coggin Deland Ford today! Our Ford service department can aid you find out what code is turning your check engine light on or scan why your check engine light is blinking.

Check Engine Light Service 2019 Ford Ranger

What do you do when you’re driving along in your Ford Ranger and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2019 Ford Ranger checked as soon as viable. Ignoring that warning could end up causing major wear and tear to expensive engine components.

When your 2019 Ford Ranger's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the mechanical control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an mechanical analyze tool that is used by our Ford auto repair mechanics at Coggin Deland Ford. There are also a number of somewhat inexpensive code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced technical to designate the issue and repair it.

Is it safe to drive your 2019 Ford Ranger with the check engine light on?

If the check engine light is twinkling, this means that there is a adequate issue and it is recommended to service your Ford Ranger immediately. This question is not highly prevailing because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is mostly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more acceptable problem. Call the advisors at Coggin Deland Ford by dialing 3862100247 so you can describe the issues. Or cut down your speed and bring your 2019 Ford to our certified mechanics as soon as convenient.